Modular Belt Conveyors
Modular belt conveyors carry products on a belt assembled from interlocking plastic modules. CSTRANS offers straight, turning and inclined conveyors, plus a bottle accumulation table for holding bottles between processes. The layout follows the required movement, with the product's contact with the belt determining the support it needs. For company-developed equipment supplied under your own brand, prepare an ODM modular belt conveyor design brief.

| Layout | Conveying Function | Selection Factors |
|---|---|---|
| Turning modular belt conveyor | Conveying FunctionChanges the direction of the conveying route. | Selection FactorsAvailable turning space and the required product orientation at each end. |
| Bottle accumulation table | Conveying FunctionProvides an area for bottles to wait between processes. | Selection FactorsBottle base and dimensions, incoming and outgoing rates, and required waiting time. |
| Straight-running modular belt conveyor | Conveying FunctionConnects positions along a straight route. | Selection FactorsTravel distance, product size and connecting equipment heights. |
| Inclined modular belt conveyor | Conveying FunctionCombines forward travel with a change in height. | Selection FactorsElevation change, available horizontal length and product support on the incline. |
Modular Belt Conveyor Specifications
Turning Modular Belt Conveyor
| Parameter | Specification |
|---|---|
| Curve Angles | 45° / 90° / 135° / 180° |
| Layouts | L, S and U |
| Length | 475–10,000 mm |
| Belt Widths | 164 / 241 / 317 / 394 / 470 / 546 / 623 / 699 / 776 / 852 / 928 / 1,005 mm |
| Conveying Speed | Up to 30 m/min |
| Maximum Load | Up to 150 kg |
Straight-Running Modular Belt Conveyor
| Parameter | Specification |
|---|---|
| Frame Material | 304 stainless steel |
| Belt Materials | POM / PP |
| Conveying Speed | Adjustable, 0–60 m/min |
| Motor Power | 0.37–1.5 kW |
| Voltage | 110 / 220 / 380 V |
Bottle Accumulation Table
| Parameter | Specification |
|---|---|
| Working Speed | 0–20 m/min |
| Machine Power | 1–1.5 kW |
| Conveyor Dimensions | 1,063 × 765 × 1,000 mm |
| Single Conveyor Width | 190.5 mm |
Inclined Modular Belt Conveyor
| Parameter | Specification |
|---|---|
| Production Capacity | 4–6.5 m³/h |
| Machine Height | 3,520 mm; custom heights available |
| Frame Materials | 304 stainless steel or painted steel |
| Power | 1.1 kW |
| Electrical Supply | Three-phase AC 380 V, 50 / 60 Hz |
Modular Belt Construction

Rows of plastic modules are joined with pins to form the belt. Matching sprockets engage the modules and transmit the drive. The finished width follows the selected module's assembly increments and sprocket positions.
For equipment with a continuous PVC or PU belt, see our PVC and PU belt conveyors. For a replacement modular belt or individual modules, use the component catalogue and provide the series, pitch, width and drive-sprocket photographs. Include photographs of the modules and pins when identifying an existing assembly.
On compatible belt series, flights and sidewalls form carrying compartments for inclined transport. Flight spacing follows the belt pitch, while flight width and the height of the flights and sidewalls are selected for the product. Flat, open-grid and raised-rib surfaces have different contact geometries, so the transfer arrangement must suit the selected surface.
For a raised-rib configuration, the transfer plate must match the belt series. CSTRANS also offers knife-edge modular-belt transfer arrangements for a small end radius. These options need the corresponding belt and end geometry. Automatically adjustable guide rails, stops, positioning devices and buffer sections can be configured around the connecting process. For an existing line, send the belt series and end drawings, and identify whether the transfer uses a knife edge or a raised-rib belt with a matching transfer plate.
Product Support at Transfers and Inclines
The belt supports the product along the route. At each infeed and discharge, the product passes to another surface. A small contact area, a change in travel direction or a gap between machines changes the support available during that transfer.
The smallest and largest product dimensions, loaded weights and base photographs help establish the support requirements. The layout also needs to show transfer points, product spacing and orientation where the conveyor feeds another machine.
On an accumulation table, incoming and outgoing rates and the time bottles need to wait determine the holding requirement. The operating description should cover what happens when the downstream machine stops. On an incline, loose products, packaged products and containers present different support conditions. State whether bottle-to-bottle contact is acceptable and whether discharge must feed individual bottles or groups.

Belt Material and Cleaning
POM and PP belt materials are available according to the belt series. The selected material and frame arrangement must suit direct product contact, operating temperature, chemical exposure and the cleaning method. For food-conveying applications, contact CSTRANS for FDA-related documentation covering the selected plastic belt material.
Request a Modular Belt Conveyor Quote
Send your layout and product details with your enquiry. Mark the approach and exit paths, available floor space and the heights of the adjoining machine connections. Identify any existing belt material or machine interface that must be retained. For a flighted incline, include photographs of the product or loose material and the intended filling pattern, elevation change, normal and peak feed rates, discharge arrangement and cleaning requirements. Identify any existing belt series that must be retained.
Contact CSTRANS
Leave Your Message
Plastic-chain routes are covered by our flexible chain conveyors. The broader conveyor systems range includes other equipment types. For a modular belt following successive turns between levels, review the spiral belt conveyor layout and belt selection guide.




