Flexible Conveyor Systems and Components
CSTRANS supplies complete plastic-chain conveyor systems and individual chains, drive ends and bends. The equipment range covers new conveyor projects, while the component catalogue provides parts for existing lines. For bearings handled as products, use the bearing workpiece conveyor enquiry. For a continuous replacement belt, prepare the PVC conveyor belt identification details.

CSTRANS Flexible Conveyor Systems and Components

Flexible Chain Conveyor Drive End

Plastic Chain Flexible Conveyor System

Factory Customization High Quality Flexible Chain Plate Conveyor

44 Flexible Chain Conveyor Horizontal Wheel Bend

63 Plastic Flexible Conveyor Chains

83 Plastic Flexible Chains

295 Flexible Conveyor Chains

Plastic Flexible Seamless Conveyor Chain

Plastic Flexible Roller Conveyor Chain

103 Flexible Plain Plastic Chains

63B Steel Top Flexible Plain Chains

140 Flexible Plain Plastic Chains

63C Flexible Plain Chains with Flight

Flexible Conveyor Chain with Friction

Flexible Top Chain with Friction

V Block Plastic Flexible Conveyor Chain

Plastic Flexible Conveyor Chain with Flight

Gripper Flexible Conveyor Chain

Horizontal Plain Bend for Flexible Chain Conveyor
| What You Need | Where to Start |
|---|---|
| An assembled plastic-chain conveyor | Flexible chain conveyor systems |
| Conveyor chain, a drive end, a bend or another component | Conveyor component catalogue |

Matched Conveyor Components
The chain, drive and idler units, conveyor beam, wear strips and bends work as a matched assembly. The drive moves the chain along its supporting track; the wear strips provide the sliding surface. Horizontal and vertical bends guide the chain through changes in the route. A replacement part needs to match that assembly as well as the required conveying surface.


Our 140 mm chain family includes flat-top and toothed versions with different drive, beam and wear-strip requirements. Nominal chain width alone is therefore insufficient for identifying a replacement. For a bend, the chain series, wheel or sliding-guide arrangement, centerline radius, angle and adjoining straight lengths define the part required. These details are especially useful when an existing component has no readable part number.
Chain and Component Options
| Component | Specification or Option |
|---|---|
| Flexible Chain Widths | 44, 63, 83, 103, 140, 175 and 295 mm |
| Plastic Chain Material | POM (Polyoxymethylene) |
| Wear Strip Material | PE (Polyethylene) |
| 140 mm Chain Profiles | Flat-top and toothed versions with matching drive units, beams and wear strips |
| Bend Assemblies | Horizontal wheel bends, horizontal sliding-guide bends and vertical bends |
System and Component Enquiries
A complete conveyor is selected around the product and its route through the line. Send the product dimensions and weight, required rate and a layout showing the connecting equipment. Changes in direction or height should be marked on the drawing. The flexible chain conveyor range has more detail on complete-system selection.
A replacement chain or component needs to fit the existing equipment. Send the equipment or chain identification, the part number if available, and the quantity required. Clear photographs and relevant dimensions help when the identification is incomplete. A photo showing where the part sits on the conveyor also shows how it is used.
Use the conveyor component catalogue for individual chains, belts, wear strips and replacement parts. Include the matching guide, sprocket or supporting parts where relevant, and describe the operating conditions and the issue being addressed. Similar appearance or nominal size alone does not confirm compatibility.
